0.08mm Enamelled NICR alloy NiCr20AlSi/nichrome Karma Resistance Heating resistor wire
Impahla ye-Karma
| igama | ikhodi | Ukwakhiwa Okuyinhloko (%) | Okujwayelekile
| |||
| Cr | Al | Fe | Ni | |||
| I-Karma | 6j22 | 19-21 | 2.5~3.2 | 2.0~3.0 | bal. | I-JB/T 5328 |
| Igama | Ikhodi | (20ºC) Ukungazweli (μΩ.m) | (20ºC) Temp. I-Coeff.Yokumelana (αX10-6/ºC) | (0~100ºC) I-ThermalEMF vs. Ithusi | Ukusebenza okuphezulu Izinga lokushisa.(ºC) | (%) Ukwelula | (N/mm2) I-tensile Amandla | Okujwayelekile |
| I-Karma | 6j22 | 1.33±0.07 | ≤±20 | ≤2.5 | ≤300 | >7 | ≥780 | I-JB/T 5328 |
4. Izici ezihlukile ze-Karma resistance wire
1) Ukuqala nge-Nickel Chromium yezintambo zokushisa zikagesi ze-Class 1, sashintsha enye ye-Ni
I-Al nezinye izakhi, futhi ngaleyo ndlela kuzuzwe okunembayo ukumelana nokusetshenziswa okuthuthukisiwe
ukumelana nokushisa kwe-coefficient kanye nokushisa kwe-electromotive force ngokumelene nethusi.
Ngokungezwa kwe-Al, siphumelele ukwenza ivolumu yokuphikiswa izikhathi eziphindwe ka-1.2
kunentambo yokushisa kagesi ye-Nickel Chromium Ikilasi 1 namandla aqinile ngokuphindwe izikhathi ezingu-1.3.
2) I-coefficient yesibili yokushisa engu-β ye-Karmalloy wire KMW incane kakhulu, - 0.03 × 10-6/ K2,
futhi ijika lokushisa lokumelana liphenduka cishe umugqa oqondile phakathi kobubanzi
izinga lokushisa.
Ngakho-ke, i-coefficient yezinga lokushisa isethwe ukuthi ibe yisilinganiso se-temperature coefficient phakathi
23 ~ 53 °C, kodwa 1 × 10-6/K, isilinganiso sesilinganiso sokushisa esiphakathi kuka-0 ~ 100 °C, singase futhi
yamukelwe i-coefficient yezinga lokushisa.
3) Amandla kagesi ngokumelene nethusi phakathi kuka-1 ~ 100 °C nawo mancane, ngaphansi kuka + 2 μV/K, futhi
ikhombisa ukuzinza okuhle kakhulu phakathi neminyaka eminingi.
4) Uma lokhu kuzosetshenziswa njengento yokumelana nokunemba, ukwelashwa kokushisa okuphansi
okudingekayo ukuze kuqedwe ukuhlanekezelwa kokucubungula njengoba kwenzeka ku-Manganin wire CMW.
Uhlobo lwe-Insulation
| Igama le-insulation-enamelled | I-Thermal LevelºC (isikhathi sokusebenza 2000h) | Igama lekhodi | Ikhodi ye-GB | I-ANSI. UHLOBO |
| I-polyurethane enamelled wire | 130 | UEW | QA | MW75C |
| I-polyester enamelled wire | 155 | I-PEW | QZ | MW5C |
| Intambo enamelled ye-polyester-imide | 180 | I-EIW | QZY | MW30C |
| I-Polyester-imide ne-polyamide-imide enameleli yocingo oluphindwe kabili | 200 | I-EIWH(DFWF) | QZY/XY | MW35C |
| Intambo enamelled ye-Polyamide-imide | 220 | I-AIW | QXY | MW81C |
