Zonke Izinhlobo Ze-Nickel Alloy Welding Wire Erni-1 Ernicrmo-3 Ernicrmo-4 Ernicr-3 Ernicu-7 Ernicrmo-14 Ernicrmo-7 Ernicrmo-10
ISINGENISO
1 isetshenziselwa ukushisela i-Nickel 200 kanye ne-201. Ukusabela kwe-titanium ne-carbon kugcina izinga eliphansi lekhabhoni yamahhala futhi kwenza insimbi yokugcwalisa isetshenziswe ne-Nickel 201. Insimbi yokushiselaI-ERNi-1inokumelana nokugqwala okuhle, ikakhulukazi kuma-alkali.
Amagama Ajwayelekile: Oxford Alloy® 61 FM61
Okujwayelekile: ASME SFA 5.14 UNS N02061 AWS 5.14 AWS ERNi-1
UKWAKHIWA KWEKHEMICAL(%)
| C | Si | Mn | S | P | Ni |
| ≤0.05 | 0.35-0.5 | ≤0.9 | ≤0.01 | ≤0.01 | ≥95.0 |
| Al | Ti | Fe | Cu | abanye | |
| ≤1.5 | 2.0-3.5 | ≤1.0 | ≤0.15 | <0.5 |
I-WELDING PARAMATERS
| Inqubo | Ububanzi | Amandla kagesi | I-Amperage | Igesi |
| I-TIG | .035″ (0.9mm) .045″ (1.2mm) 1/16″ (1.6mm) 3/32" (2.4mm) 1/8″ (3.2mm) | 12-15 13-16 14-18 15-20 15-20 | 60-90 80-110 90-130 120-175 150-220 | 100% Argon 100% Argon 100% Argon 100% Argon 100% Argon |
| I-MIG | .035″ (0.9mm) .045″ (1.2mm) 1/16″ (1.6mm) | 26-29 28-32 29-33 | 150-190 180-220 200-250 | 75% Argon + 25% Helium 75% Argon + 25% Helium 75% Argon + 25% Helium |
| SAW | 3/32" (2.4mm) 1/8″ (3.2mm) 5/32″ (4.0mm) | 28-30 29-32 30-33 | 275-350 350-450 400-550 | I-Flux efanelekayo ingasetshenziswa I-Flux efanelekayo ingasetshenziswa I-Flux efanelekayo ingasetshenziswa |
IZIMPAHLA ZEMITHETHO
| Amandla Okuqina | 66,500 PSI | 460 MPA |
| Isivuno Amandla | 38,000 PSI | 260 MPA |
| Ukwelula | 28% |
IZICELO
I-1 nickel based welding wire isetshenziselwa ukuhlanganisa i-nickel 200 ne-nickel 201. Lokhu kuhlanganisa amamaki e-ASTM afana ne-B160 - B163, B725 kanye ne-B730.
· Isetshenziswa ezintweni ezihlukahlukene ezingafani phakathi kwama-nickel alloys kuya ezinsimbi ezingagqwali noma ze-ferritic.
· Isetshenziselwa ukumboza insimbi ye-carbon kanye nokulungisa izinsimbi ezisansimbi.
