ChemicalCukuphikisa: Ngokusho kwe-GB/T5231-2012 standard
Igama | Ibanga | ChemicalCukuphikisa,% | Ukungcola okuphelele % | |||||||||||
Cu | Ni | Fe | Zn | Mn | Si | Sn | Pb | Al | C | S | P | |||
Ibhulonzi | U-Bal. | 0.2 | 0.05 | 2.7~ 3.3 | - | - | 3.5~ 4.5 | 0.02 | 0.002 | - | - | 0.03 | 0.2 | |
CuSn6 | U-Bal. | 0.2 | 0.05 | 0.3 | - | - | 6.0~ 7.0 | 0.02 | 0.002 | - | - | 0.1~ 0.25 | 0.1 | |
CuSn6 | U-Bal. | 0.2 | 0.02 | 0.3 | - | - | 6.0~ 7.0 | 0.02 | 0.002 | - | - | 0.26~ 0.40 | 0.1 | |
U-Bal. | 0.2 | 0.05 | 0.3 | - | - | 7.0~ 8.0 | 0.02 | 0.01 | - | - | 0.1~ 0.25 | 0.15 | ||
QSi3-1 | U-Bal. | 0.2 | 0.3 | 0.5 | 1.0~ 1.5 | 2.7~ 3.5 | 0.25 | 0.03 | - | - | - | - | 1.1 |
Ukusebenza komkhiqizo: Ngokusho kwe-GB/T21652-2012 ejwayelekile
Ibanga | Izwe | Dia. mm | I-TS N/mm2(≥) | Ukwelula, % (≥) |
CuSn6 QSi3-1 | M | 0.1-1.0 | 350 | 35 |
>1.0-8.5 | 45 | |||
Y | 0.1-1.0 | 880-1130 | - | |
>1.0-2.0 | 860-1060 | - | ||
>2.0-4.0 | 830-1030 | - | ||
>4.0-6.0 | 780-980 |
| ||
>6.0-8.5 | 690-950 | - | ||
CuSn4 | M | 0.1-1.0 | 350 | 35 |
>1.0-8.5 | 45 | |||
Y | 0.1-1.0 | 620-820 | - | |
>1.0-2.0 | 600-800 | - | ||
>2.0-4.0 | 560-760 | - | ||
>4.0-6.0 | 540-740 | - |