Intambo yokumelana nokushisa ye-Cu-Ni alloy yaseChina Ukukhiqiza kanye neFektri

Intambo yokumelana nokushisa ye-Cu-Ni alloy Intambo yokumelana ne-CuNi1 Isithombe Esivelele

Intambo yokumelana nokushisa ye-Cu-Ni alloy Intambo yokumelana nokushisa ye-CuNi1

Incazelo emfushane:

I-Copper Nickel Alloy yenziwe kakhulu ngethusi ne-nickel. Ithusi ne-nickel kungancibilikiswa ndawonye kungakhathalekile ukuthi yiliphi iphesenti. Ngokuvamile ukumelana kwe-CuNi alloy kuzoba phezulu uma okuqukethwe yi-Nickel kukhulu kunokuqukethwe kwe-Copper. Kusukela ku-CuNi1 kuya ku-CuNi44, ukumelana kusuka ku-0.03μΩm kuya ku-0.49μΩm. Lokho kuzosiza i-resistor ukuthi ikhethe ucingo lwe-alloy olufanele kakhulu.

Ukumelana:0.03+/-5% μΩ.m

ububanzi:0.08-5.0mm

isimo:ucingo oluyindilinga lokumelana

Ubuso:Okukhanyayo

Ikhodi ye-HS:7408290000

Izinto:I-CUNI

Ubuningi:8.9 g/cm3

Isampula:I-oda elincane liyamukelwa

Sithumelele i-imeyili

Imininingwane Yomkhiqizo

Imibuzo Evame Ukubuzwa

Amathegi Omkhiqizo

Njengomkhiqizi omkhulu kanye nomthumeli ngaphandle eShayina osebenzisa i-alloy yokumelana kagesi, singahlinzeka ngazo zonke izinhlobo

ucingo kanye nemichilo kagesi yokumelana nogesi (ucingo lwensimbi yokumelana kanye nemichilo),
Izinto:I-CuNi1, CuNi2, CuNi6, CuNi8, CuNi14, CuNi19, CuNi23, CuNi30, CuNi34, CuNi44
Incazelo Ejwayelekile
Ngenxa yokuthi inamandla aphezulu okubamba kanye namanani aphezulu okumelana, izintambo ze-copper nickel alloy ziyindlela yokuqala yokukhetha.

kwezicelo njengezintambo zokumelana. Ngenani elihlukile le-nickel kulolu hlu lomkhiqizo, izici

izintambo zensimbi zingakhethwa ngokwezidingo zakho. Izintambo ze-Copper nickel alloy ziyatholakala njengezintambo ezingenalutho,

Okuqukethwe Kwamakhemikhali, %

Ni	Mn	Fe	Si	Cu	Okunye	Isiqondiso se-ROHS
						Cd	Pb	Hg	Cr
1	-	-	-	I-Bal	-	ND	ND	ND	ND

Izakhiwo Zemishini

Izinga Lokushisa Eliphezulu Lesevisi Eqhubekayo	200ºC
Ukuqina kokushisa ku-20ºC	0.03±10%ohm mm2/m
Ubuningi	8.9 g/cm3
Ukuqhuba Okushisayo	<200
Indawo Yokuncibilika	1090ºC
Amandla Okuqina, i-N/mm2 ehlanganisiwe, ethambile	140~310 Mpa
Amandla Okuqina, i-N/mm2 Cold Rolled	280~620 Mpa
Ukwelulwa (i-anneal)	25% (iminithi)
Ukwelulwa (okugoqwe okubandayo)	2% (iminithi)
I-EMF vs i-Cu, μV/ºC (0~100ºC)	-12
Isakhiwo se-Micrographic	i-austenite
Impahla Kamagnetic	Cha