I-ERNiFeCr-1 Welding Wire (UNS N08065) – I-Nickel-Iron-Chromium Alloy Filler Metal Yokukhiqiza Amandla kanye Nezicelo Zenuzi
Incazelo Yomkhiqizo
I-ERNiFeCr-1 iyintambo yokushisela i-nickel-iron-chromium alloy eklanyelwe ukuhlanganisa ama-alloys afanayo, njenge-Inconel® 600 ne-Inconel® 690, kanye nokushisela okungafani phakathi kwama-nickel alloys nezinsimbi ezingenasici noma ezine-alloy ephansi. Yaziswa kakhulu ngokumelana kwayo okuhle kakhulu nokucindezeleka kokuqhekeka kokugqwala, ukukhathala okushisayo, kanye ne-oxidation emazingeni okushisa aphakeme.
Ngokuvamile isetshenziswa ekukhiqizeni amandla enuzi, ukucutshungulwa kwamakhemikhali, nokwakhiwa kwesishintshi sokushisa, le ntambo iqinisekisa ubuqotho besakhiwo ngaphansi kwezindawo ezinengcindezi ephezulu. Ilungele izinqubo zokushisela ze-TIG (GTAW) kanye ne-MIG (GMAW).
Izici Eziyinhloko
-
Ukumelana okuhle kakhului-stress corrosion cracking, i-oxidation, nokukhathala okushisayo
-
Ukuhambisana okuphezulu kwe-metallurgical ne-Inconel® 600, 690, nezinsimbi eziyisisekelo ezingafani
-
I-arc ezinzile, i-spatter ephansi, nokubukeka kobuhlalu obushelelezi ku-TIG kanye ne-MIG yokushisela
-
Ifaneleizindawo zomusi ezinomfutho ophezulukanye nezingxenye ze-nuclear reactor
-
Amandla aphezulu emishini kanye nokuzinza kwe-metallurgical emazingeni okushisa aphakeme
-
Ivumelana neI-AWS A5.14 ERNiFeCr-1kanye ne-UNS N08065
Amagama / Iziqoko ezijwayelekile
-
I-AWS: ERNiFeCr-1
-
I-UNS: N08065
-
Ama-alloys alinganayo: Intambo yokushisela ye-Inconel® 600/690
-
Amanye Amagama: I-Nickel Iron Chromium welding filler, i-Alloy 690 welding wire
Izicelo Ezijwayelekile
-
Izingxenye zokushisela i-Inconel® 600 nezingu-690
-
Ishubhu le-nuclear generator kanye nembondela ye-weld
-
Imikhumbi yokucindezela kanye nezingxenye ze-boiler
-
Ama-welds ahlukile anezinsimbi ezingenasici nezine-alloy ephansi
-
Ishubhu yesishintshi sokushisa kanye namapayipi e-reactor
-
Imbondela yokugqoka ezindaweni ezigqwalayo
Ukwakheka Kwekhemikhali (% Okujwayelekile)
| Isici | Okuqukethwe (%) |
|---|---|
| I-Nickel (Ni) | 58.0 - 63.0 |
| Insimbi (Fe) | 13.0 - 17.0 |
| I-Chromium (Cr) | 27.0 – 31.0 |
| I-Manganese (Mn) | ≤ 0.50 |
| Ikhabhoni (C) | ≤ 0.05 |
| I-silicon (Si) | ≤ 0.50 |
| I-Aluminium (Al) | ≤ 0.50 |
| I-Titanium (Ti) | ≤ 0.30 |
Izakhiwo zikamshini (Okuvamile)
| Impahla | Inani |
|---|---|
| Amandla Okuqina | ≥ 690 MPa |
| Isivuno Amandla | ≥ 340 MPa |
| Ukwelula | ≥ 30% |
| ITemp Esebenzayo. | Kufika ku-980°C |
| Creep Resistance | Kuhle kakhulu |
Imininingwane Etholakalayo
| Into | Imininingwane |
|---|---|
| Ibanga Lobubanzi | 1.0 mm – 4.0 mm (okujwayelekile: 1.2mm / 2.4mm / 3.2mm) |
| Inqubo yokushisela | I-TIG (GTAW), MIG (GMAW) |
| Ukupakisha | 5kg / 15kg spools noma TIG izinduku eziqondile |
| Isimo Sobuso | Isiphetho esikhanyayo, esihlanzekile, esingagqwalile |
| Izinsizakalo ze-OEM | Ukulebula ngokwezifiso, ibhakhodi, ukwenza ngokwezifiso ukupakisha kuyatholakala |
Ama-alloys ahlobene
-
I-ERNiFeCr-2 (Inconel 718)
-
I-ERNiCr-3 (Inconel 82)
-
I-ERNiCrMo-3 (Inconel 625)
-
I-ERNiCrCoMo-1 (Inconel 617)
-
I-ERNiCr-4 (Inconel 600)
