Ukusebenza Kahle I-CuniI23 Heating Alloy Wire enesixazululo esisebenzayo nesizinzile
I-Cuni 23 Heating Alloy Wire enesixazululo esisebenzayo nesizinzile
Amagama ajwayelekile:I-CuNi23Mn, NC030, 2.0881
I-Copper nickel alloy wirekuwuhlobo locingo olwenziwe ngenhlanganisela yethusi ne-nickel.
Lolu hlobo locingo lwaziwa ngokukwazi ukumelana nokugqwala kanye nekhono lokumelana namazinga okushisa aphezulu.
Ivamise ukusetshenziswa ezinhlelweni lapho lezi zakhiwo zibalulekile, njengasezindaweni zasolwandle, izintambo zikagesi, nezinhlelo zokufudumeza. Izakhiwo ezithile zocingo lwe-copper nickel alloy zingahluka kuye ngokuthi ingxubevange yakhiwe kanjani, kodwa ngokuvamile ibhekwa njengento ehlala isikhathi eside futhi enokwethenjelwa ezinhlobonhlobo zezinhlelo zokusebenza.
1. I-Copper Nickel wire kulula ukushiselwa futhi kulula ukwenziwa, ngakho ingenziwa ngezindlela eziningi futhi isetshenziswe kabanzi kuzo zonke izindawo.
2. Ama-alloys e-Copper Nickel (CuNi) ayizinto ezimelana neziphakathi kuya kweziphansi ngokuvamile ezisetshenziswa ezinhlelweni ezinamazinga okushisa aphezulu afika ku-400°C (750°F).
3. Ama-alloys e-copper nickel ane-coefficient ephansi yokwandisa ukushisa, okuwavumela ukuthi amelane nemijikelezo yokushisa ngaphandle koshintsho olubalulekile lwe-dimensional.
4. Ama-alloys e-copper nickel abonisa ukumelana kahle nokugqwala, ikakhulukazi ezindaweni zasolwandle. Lokhu kubenza balungele ukusetshenziswa ezindaweni ezinamanzi anosawoti.
5. Nge-conductivity ephezulu kagesi, amandla amahle omshini, okuvumela izinhlelo zokusebenza ezinzima.
6. Izakhiwo zemishini zingenziwa ngasese, ukuze kuqinisekiswe ukusetshenziswa okuzinzile nokuthembekile ezimeni ezahlukene.
Okuqukethwe Kwekhemikhali, %
| Ni | Mn | Fe | Si | Cu | Okunye | I-ROHS Directive | |||
| Cd | Pb | Hg | Cr | ||||||
| 23 | 0.5 | - | - | U-Bal | - | ND | ND | ND | ND |
Izakhiwo Zemishini ye-CuNi23 (2.0881)
| I-Max Continuous Service Temp | 300ºC |
| I-resissive ku-20ºC | 0.3±10%ohm mm2/m |
| Ukuminyana | 8.9 g/cm3 |
| I-Thermal Conductivity | <16 |
| I-Melting Point | 1150ºC |
| Amandla Okuqina,N/mm2 Ahlanganisiwe,Athambile | > 350 MPA |
| Ubude (onyaka) | 25%(amaminithi) |
| I-EMF vs Cu, μV/ºC (0~100ºC) | -34 |
| Impahla Magnetic | Cha |