Siyakwamukela kumawebhusayithi ethu!
English
1
Isibhengezo (1)
Isibhengezo (3)
Isibhengezo (2)
I-Permalloy E11c Ni79Mo4 79HM I-Soft Magnetic Alloy Wire Isithombe Esifakiwe
  • I-Permalloy E11c Ni79Mo4 79HM I-Soft Magnetic Alloy Wire
  • I-Permalloy E11c Ni79Mo4 79HM I-Soft Magnetic Alloy Wire
  • I-Permalloy E11c Ni79Mo4 79HM I-Soft Magnetic Alloy Wire
  • I-Permalloy E11c Ni79Mo4 79HM I-Soft Magnetic Alloy Wire

I-Permalloy E11c Ni79Mo4 79HM I-Soft Magnetic Alloy Wire

Incazelo emfushane:


I-Permalloy 80 iyingxube ye-nickel, insimbi ne-molybdenum. Ingxubevange kazibuthe ethambile enokungena kukazibuthe okuphakeme kakhulu. I-alloy inokuphoqelela okuphansi, eduze kwe-zero magnetostriction, kanye nokumelana okuphawulekayo kwe-anisotropic magnetoresistance. I-magnetostriction ephansi ibalulekile ekusebenzeni kwezimboni,

lapho ukucindezelwa okuguquguqukayo kumafilimu amancanyana bekungabangela ukuhlukahluka okukhulu okulimazayo kwezakhiwo kazibuthe.


  • Inombolo yemodeli:I-Permalloy
  • Ukungazweli:0.55
  • Ubude (≥ %):15-25
  • Ibanga:E11C
  • Ni :78.5-80.0%
  • Isici:I-Permeability Ephezulu Yokuqala
  • Umsuka:China

    • Imininingwane Yomkhiqizo

    FAQ

    Omaka bomkhiqizo

    Ipharamitha

    ITHEBULA 1 Isidingo Sekhemikhali

    Isici C≤ P≤ S≤ UMn Si Cu≤ Mo Ni Fe
    Ukwakheka% 0.03 0.02 0.02 0.6-1.1 0.3-0.5 0.20 3.8-4.1 78.5-80.0 Okusele

    Amanothi:

    Ukuma nobukhulu be-alloys kuhambisana ne-GBn198-88

    ITHEBULA 2 Izidingo Zomzimba

    Impahla I-Resisitivity(μΩM) I-Desinty(g/cm3) I-Curie Point.C Ukugcwaliswa okuphezulu kwe-magneto-striction coefientλθ/10-6
    Inani 0.55 8.6 450 2

    ITHEBULA 3 I-AC Magnetic Properties for Strip(min Value)

    Ubukhulu Isiqongo samandla kazibuthe ngu-0.1A/m, Ngaphansi kwefrikhwensi ehlukile yokufinyeleleka kazibuthe okuguquguqukayo μm/(mH/m)
    60Hz 400Hz 1KHz 10KHz
    0.02 17.5 12.5
    0.05 18.8 9.4
    0.10 22.5 15
    0.20 12.5 7.5
    0.35 25 8.8

    ITHEBULA 4 I-Coefficient of Linear Expansion at different Temperature/(x10-6)

    Temp 20-100°C 20-200ºC 20-300ºC 20-400ºC 20-500ºC 20-600ºC 20-700ºC
    Inani 1.3-10.8 10.9-11.2 14.4-12.9 11.9-12.5 12.3-13.2 12.7-13.4 13.1-13.6

    ITHEBULA 5 Isidingo sikaZibuthe (Umcu Ogoqayo obandayo)

    Ibanga I

    (δ&D)/mm μ0.08/(mHm)≥ μm(mHm)≥ Bs/T≥ Hc(A/M)≤
    0.005 12.5 44.0 0.75 6.4
    0.01 17.5 87.5 0.75 4.8
    0.02-0.04 20.0 112.5 0.75 4.0
    0.05-0.09 22.5 137.5 0.75 2.8
    0.10-0.19 25.0 162.5 0.75 2.0
    0.20-0.34 28.0 225.0 0.75 1.6
    0.35-1.00 30.0 250.0 0.75 1.2
    1.10-2.50 27.5 225.0 0.75 1.6
    2.50-3.00 26.3 187.5 0.75 2.0

    Ibanga II

    (δ&D)/mm μ0.08/(mHm)≥ μm(mHm)≥ Bs/T≥ Hc(A/M)≤
    0.02-0.04 22.5 125.0 0.75 2.4
    0.05-0.09 25.0 150.0 0.75 2.0
    0.10-0.19 27.5 187.5 0.75 1.6
    0.20-0.34 31.3 250.0 0.75 1.2
    0.35 32.5 275.0 0.75 0.79

    Ibanga III

    (δ&D)/mm μ0.08/(mHm)≥ μm(mHm)≥ Bs/T≥ Hc(A/M)≤
    0.01 25.0 150.0 0.73 2.4
    0.02-0.04 31.0 190.0 0.73 1.6
    0.05-0.09 38.0 250.0 0.73 1.2
    0.10-0.19 38.0 250.0 0.73 1.2
    0.20-0.34 38.0 280.0 0.73 1.0
    0.35 44.0 310.0 0.73 1.0

    Hot Rolling(forging) Flastspring

    (δ&D)/mm μ0.08/(mHm)≥ μm(mHm)≥ Bs/T≥ Hc(A/M)≤
    3-22 25.0 125 0.75 2.4

    Ibha Eshisayo Yokuginqa (Forging).

    (δ&D)/mm μ0.08/(mHm)≥ μm(mHm)≥ Bs/T≥ Hc(A/M)≤
    8-100 25.0 125.0 0.75 2.4
  • Okwedlule:
  • Olandelayo:
    • Bhala umyalezo wakho lapha futhi usithumelele wona

    Izigaba zemikhiqizo

    Chofoza u-enter ukuze useshe noma u-ESC ukuze uvale