I-Pure Nickel 200 / En22200 Wire 0.25mm
Ibanga: Ni200, NI201, N4, N6
I-Cuctility ephezulu
Ukumelana kahle kokugqwala okuhle
amandla amahle okusebenza
Incazelo ye-Alloy
I-Nickel 200/201 isetshenziswa kakhulu ebangeni, ngokuvamile echazwe ngama-transistor cap, ama-anode amashubhu we-elekthronikhi, okuholela ezingxenyeni ze-elekthronikhi / ukuhola-izintambo zamalambu kanye ne-wire-mesh. Ibuye isetshenziswe kwifomu le-strip izicelo ezahlukahlukene kufaka amabhethri we-ni-CD.
Isimo sokuhlinzekwa
I-Nickel 200, 201 kanti 205 ihlinzekwa kule mibandela elandelayo:
Kudonswa kubanda, intukuthelo ekhethekile.
Kubanda, kuncishisiwe. Iqonde futhi isike ubude.
Qaphela:
Nus n02201 (ASTM B 162) okufanayo ne-N4 (GB / T 2054).
Nus n02200 (ASTM B 162) okufanayo ne-N6 (GB / T 2054).
Amafomu
Coil - Strip, Foil, Ribbon
I-Wire - Iphrofayili, Round, Flat, Square
induku, ibha, ukuthethelelwa, ipuleti, ishidi
Ukwakheka kwamakhemikhali
Khuphuka | Ni + co | Cu | Si | Mn | C | Mg | S | P | Fe |
N4 | 99.9 | 0.015 | 0.03 | 0.002 | 0.01 | 0.01 | 0.001 | 0.001 | 0.04 |
N6 | 99.6 | 0.10 | 0.10 | 0.05 | 0.10 | 0.10 | 0.005 | 0.002 | 0.10 |
I-NI201 | 99.0 | ≤0.25 | ≤0.35 | ≤0.35 | ≤0.02 | / | ≤0.01 | / | ≤0.40 |
Ni200 | 99.0 | 0.20 | 0.30 | 0.30 | 0.15 | / | 0.01 | / | 0.40 |
Amandla we-nickel foil
Khuphuka | I-Pure Nickel Strip 99.6% / 99.9% |
Ukujiya | 0.002 kuya ku-2.50 mm |
Ukubekezelela | +/- 5% (ukubekezelela okukhethekile kuyatholakala) |
Ububanzi | Kufika ku-350mm ububanzi |
Usayizi wemali | Kufika kuma-80 kg ngaphandle kwama-welds |
Amabanga okuvutha | Ancishiswe ukugcwala kanzima |
Ukunemba komkhiqizo we-Nickel Foil
Ukujiya | Ukujiya imvume | Burrrr ubude | Ububanzi bokububanzi nokubekezelelana | |||||
2≤w <10 | 10≤w <50 | 50≤w <100 | I-100≤w <150 | I-150≤w <200 | I-200≤w | |||
0.02≤t <0.05 | ± 0.003 | ≤0.005 | ± 0.05 | ± 0.10 | ± 0.15 | ± 0.20 | ± 0.30 | ± 0.50 |
0.05≤t <0.1 | ± 0.005 | ≤0.01 | ||||||
0.1≤t <0.2 | ± 0.008 | ≤0.015 | ||||||
0.2≤t <0.3 | ± 0.012 | ≤0.02 | ||||||
0.3≤t <0.4 | ± 0.015 | ≤0.03 | ± 0.10 | ± 015 | ± 0.25 | ± 0.50 | ± 0.80 | ± 1.00 |
0.4≤t <0.6 | ± 0.025 | ≤0.05 | ||||||
0.6≤t <0.8 | ± 0.030 | ≤0.06 | ± 0.30 | ± 0.40 | ± 0.50 | ± 0.50 | ± 0.80 | ± 1.00 |
0.8≤t <1.0 | ± 0.040 | |||||||
I-1.0≤t <1.2 | ± 0.050 | ≤0.08 | ± 0.50 | ± 0.50 | ± 0.80 | ± 1.00 | ± 1.00 | ± 1.50 |
1.2≤t <1.4 | ± 0.060 | |||||||
1.4≤t <1.7 | ± 0.070 | ≤0.10 | ||||||
1.7≤t <2.0 | ± 0.080 |