Siyakwamukela kumawebhusayithi ethu!
English
1
I-FeCrAl Alloy A1 Kan-thal APM Resisstance Heating Wire for Kilns Isithombe Esifakiwe
  • I-FeCrAl Alloy A1 Kan-thal APM Resisstance Heating Wire for Kilns
  • I-FeCrAl Alloy A1 Kan-thal APM Resisstance Heating Wire for Kilns
  • I-FeCrAl Alloy A1 Kan-thal APM Resisstance Heating Wire for Kilns
  • I-FeCrAl Alloy A1 Kan-thal APM Resisstance Heating Wire for Kilns

I-FeCrAl Alloy A1 Kan-thal APM Resisstance Heating Wire for Kilns

Incazelo emfushane:

Imikhiqizo yezintambo ezidonsa ngamakhaza engu-A1 yosayizi omkhulu ingasetshenziselwa isithando somlilo esimelana nezinga lokushisa eliphezulu.Ukuzijwayeza kufakazele ukuthi: inqubo yomkhiqizo izinzile, ukusebenza okuhlanganisiwe kuhle.Inokumelana okuhle nokushisa okuphezulu kwe-oxidation nempilo ende yesevisi;izakhiwo ezinhle kakhulu zokuvala izinga lokushisa ekamelweni, kulula ukucubungula ukubunjwa;ukuqina okuncane kwe-rebound nokunye.Ukusebenza kokucubungula kuhle kakhulu;izinga lokushisa lokusebenza lingafinyelela ku-1400 ℃.
Ukucaciswa okuyinhloko kanye nokusetshenziswa:

Ukucaciswa Komkhiqizo Okuvamile: 0.5 ~ 10 mm

Izinto ezisetshenziswayo: ikakhulukazi ezisetshenziswa esithandweni se-powder metallurgy, isithando somlilo sokusabalalisa, isifudumezi seshubhu ekhazimulayo kanye nazo zonke izinhlobo zemizimba yokushisa yokushisa ephezulu.


  • Inombolo yemodeli: A1
  • Ubuso:Igolide / elikhanyayo
  • Iphakheji Yezokuthutha:Ikesi Lokhuni, Iphalethi Yokhuni
  • Ukucaciswa:0.5 ~ 10 mm, ISO9001, ISO14001
  • Umsuka:umsuka
  • Ukungazweli:1.45

    • Imininingwane Yomkhiqizo

    FAQ

    Omaka bomkhiqizo

    IZIMALI ZEKHEMICAL EZISEMQOKA KANYE NEZAKHIWO

     

    Izakhiwo \ Ibanga

    A1

    Cr

    Al

    Re

    Fe

    25.0

    6.0

    Kuyafaneleka

    Ibhalansi

    I-Max Continuous Service Temperature(ºC)

    Ububanzi 1.0-3.0

    Ububanzi obukhulu kuno-3.0,

    1225-1350℃

    1400℃

    Ukungazweli 20ºC (ohm*mm2/m)

    1.45

    Ukuminyana(g/cm3)

    7.1

    Iphoyinti Lokuncibilika Eliseduze( ºC)

    1500

    Ubude (%)

    16-33

    Ukugoba Kaningi (F/R) 20℃

    7-12

    Isikhathi Senkonzo Eqhubekayo 1350℃

    Ngaphezu kwe80 amahora

    Isakhiwo seMicrographic

    I-Ferrite
    Isithando somlilo Umoya Omile Umoya Oswakeme i-hydrogen-argon I-Argon Ukubola
    umkhathi igesi igesi ammonia
    Temp(℃） 1400 1200 1400 950 1200

     

    Imaniwali yosebenzisayo

     

    1. I-Voltage elinganiselwe: 220V/380V

     

    1. Inqubo yokufaka ukugwema ukungqongqoza, ukugwema umswakama, ucingo lwesitofu oluphathwa ngesandla, kufanele bagqoke amagilavu.Intambo kufanele ifakwe ngemva kokuba isithando somlilo sihlala siyisicaba, futhi kuvimbele ukuklwebheka kwendawo, ukungcola, ukugqwala, noma ukufakwa okungafanele, ngokuthinta ukuphila

     

    1. Ku-voltage elinganiselwe ezosetshenziswa.Emkhathini oqinile wokunciphisa, umoya we-asidi, umkhathi womswakama ophezulu uzothinta ukusetshenziswa kokuphila;

     

    1. Izinga lokushisa ngaphambi kokusetshenziswa kufanele libe emkhathini owomile ongagqwali, cishe u-1000 ℃ uchithe amahora ambalwa, ukuze ifilimu yokuzivikela yocingo lwesithando somlilo yakhiwe ebusweni ngemva kokusetshenziswa okujwayelekile, ukuze iqinisekise impilo evamile yocingo lwesithando somlilo;

     

    1. Ukufakwa kwesithando somlilo kufanele kuqinisekise ukuthi intambo evalekile inamandla amahle okugwema ukuthinta isithando somlilo ngemva kocingo, ivikele ukushaqeka kukagesi noma ukusha.
  • Okwedlule:
  • Olandelayo:
    • Bhala umyalezo wakho lapha futhi usithumelele wona

    Izigaba zemikhiqizo

    Chofoza u-enter ukuze useshe noma u-ESC ukuze uvale